Page is loading ...

The modular structure of the ENERGY switchgear enables various modifications and adaptation of the switchgear to the needs of each customer, as well as the development of equipement from leading manufacturers. The use of the pull-out technique enables quick replacement of the devices without having to switch off the switchgear. 

Switchgear construction: 

  • Frame parts and accessories: AZ150 aluzincall coated steel, protective layer thickness min. 20μm,
  • Housing parts and socle: AZ150 aluzincalled steel + polyester powder paint (RAL 7035 color).

Operating conditions:

Ambient temperature:

  • the lower limit of the ambient temperature -5 ° C (-25 ° C),
  • upper limit of ambient temperature + 40 ° C,
  • the average ambient temperature during 24 hours: -5 ° C to 35 ° C,
  • relative humidity: up to 50% (at 40 ° C),
  • height of the installation site up to 1000m above sea level,
  • atmosphere in the place of installation free from chemically aggressive conductive dusts, vapors and gases.

Basic parameters: 

In measuring part max 63A
In connector part max 160A
Rated voltage 230/400A
The rated volateg of the insulation 500/690V
Nominal frequency 50~60Hz
Degrees of protection IK10, IP44(opcja IP54)
Working temperature -50ºC; +85ºC

Icw rated current, short - term, withstand


Ipk Rated current, peak, withstand


Permissible duration of the electric ars


Protection class

I - for metal enclosures with the option of partial isolation
II - for thermoset enclosures 




ENERGY otwarta