Page is loading ...

Tight control cabinets, depending on mounted equipment, can be used for low voltage switchgears building, control cabinets for supervision of production processes.

  • Materiał: AZ150  Aluzinc steel sheet,
  • Elements connected by means of riveting, screwing and welding,
  • Single door for a cabinet width less than or equal to 1000 mm,
  • Double door for a cabinet width greater than 1000mm,
  • EPDM gasket applied to the edge of the cabinet,
  • Flat roof,
  • Slope roof  (optional equipment),
  • Roof and base with a notch enabling cable glands mounting ,
  • 3-point lever lock for patented locking cylinder,
  • Cabinets, socles and roofs powder coated.
  • Corrosion resistance,
  • Back wall and sides perforations for mounting equipment on any height and depth,
  • Different types of socles enables placing on different surfaces.
Installation method:
  • C10 - on socles h=100mm,
  • CW -  non free-standing socles with a inspection panel, h=400mm,
  • CZ - on socles designed to put in the ground, h=900mm,
  • CW+CZ - on socles designed to put in the ground with inspection panel, h=1300mm,
Operating conditions:
  • W - indoors,
  • Z - outside.
Optional equipment:
  • Mounting plates,
  • Socles,
  • Cable gland plates,
  • Slope roof.


Obudowy SSS

miniatura katalog obudowy i szafy metalowe 2017

See the whole catalog of metal enclosures in a new window. 

Basic parameters;
Impact resistance IK10
Protection rating IP 55
Protection class I
Colour RAL 7035